Low O2 sensor readings

[Kurt Bilinski]

At 02:08 PM 5/23/97 -0400, you wrote:

>Where are the basic grounds I should check for?  I assume battery to body
>panel, computer grounds, battery to engine.  My ground cable goes to the
>alternator bracket on the Monte.  Should it ground to the block?

If you want to REALLY get rid of ground loops forever, ground the negative
battery terminal to the chassis where convienient.  Now run _separate_
grounds from all other electrical assemblies back to that common point.
Computer, engine block, anything with any sort of current running to it.

That will fix it.

Kurt