MOTORCYCLE THROTTLE BODIES

[Tony Cooper]

sdelanty at sonic.net wrote:

>    The other setup uses only a pot on the throttle shaft, plus the airtemp
>    sensor and the engine temp sender.
> 
>    Both systems use a non adjustable pressure regulator connected to
>    manifold vacuum...
> 
>    Engine output is rated at 108HP @ 8500RPM.
> 
>                 Steve Delanty  <sdelanty at sonic.net>
> 
> 
Using this system, it is possible to achieve just over 200hp on unleaded
gas using the standard fuel pump and a turbo pressure regulator. Any
more than that and you need a bigger fuel pump and you have to open the
fuel supply up a bit, as it is very restrictive!!!!

Tony
-- 
Sent By Tony Cooper.
email: tony.cooper at virgin.net
Allow at least 10 working minutes for reply. ;)