Flow Bench?

dzorde dzorde at geocities.com
Fri Nov 21 06:40:23 GMT 1997


Unless of course you live on the other side of the globe, like OZ.

Dan     dzorde at geocities.com

>Parts list for budget flow bench:
>
>1 of 10ft X 4" PVC pipe
>2 of 4" 90 degree PVC elbow
>4 of 4" 45 degree PVC elbow
>2 4" vacuum gates (from dust collector system)
>1 of 4" to 3" pvc reducer
>1 of 3" to 2: pvc reducer
>1 of 2" pvc "T"
>1 of 2ft X 2" PVC pipe
>1 of 2" pvc gate valve 
>1 can PVC glue
>1 Pkg JB QuikWeld epoxy
>1 of 25 ft X 1/8" id plastic tubing
>1 of 3 ft X 1/8" id aluminum tubing
>1 gallon distilled water
>1 tube food colouring
>1 yardstick with inch and metric markings
>2 of 4'X8' 3/4" particle board for case
>1 2' X 4' white melamine shelf 1/2" thick
>1 sears 6HP shop vac
>1 Dwyer A-532 Air VCelocity calculator
>
>Price it out and see if you can afford it :}
>
>Instructions to build are in issue #7 Mopar Tech Special, published by
>Harris Publications Inc, 1115 Broadway, NY 10010.
>Due to copyright laws and common decency,I cannot supply the plans, but
>the mag is $4.50 US or $4.95 Canadian, so it won't break the bank to
>check it out. Should be available on most quality magazine stands.
>
>-- 
>                             _/\_
>                     --|-----([])-----|--
>                       S    0/  \0    B
>
>Remove the R from E-Mail Address to reply. Stop the spammers!!!
>It's hard to soar like an eagle when your stuck with a bunch of 
>Turkeys
>




More information about the Diy_efi mailing list