4-cyl HEI in GM Autos?

[Clare Snyder]

amcknig at creighteld.k12.az.us wrote:
> 
> Garfield
> 
> Someone mentioned converting the 8 cyl cap to 4 cyl.
> It works but,  I don;'t like the coil in the cap, too much weight and
> too high.  The 4cyl caps fit BUT make sure the reluctor points,
> rotor, and cap contact all line up.  I had to rotate  some 22 1/2
> degrees on the body to get everything lined up.  I can't find a coil
> in cap 4 cyl cap.
> 
> Bob McKnight
> Phx
> az
 Use MSD8401 from Summit. It is a dust cover that replaces the coil on
the HEI cap, allowing use of external, firewall mounted coil. Cost,
$24.95
-- 
                             _/\_
                     --|-----([])-----|--
                       S    0/  \0    B

Remove the R from E-Mail Address to reply. Stop the spammers!!!
It's hard to soar like an eagle when your stuck with a bunch of 
Turkeys