Op Amp 101

[swagaero]

Steve Lamb wrote:
> 
> >You can smoothen out the rumpity idle by placing a vacuum canister between
> >the manifold and the MAP sensor.  Only heard of it being done, never tried it
> >myself.  Any ideas of dimentions out there.
> 
> I would think that a canister would introduce too much 'lag' (depending on
> the size).  If this is to solve fluctuations of vac at idle I would try
> experimenting with restrictors in the vac line (starting at say 1mm diam).
> Certainly worked for me (and is also recommended by MOTEC, BTW).
> 
> Cheers
> 
> Steve Lamb
> Department of Defence, DSTO
> Aeronautical and Maritime Research Laboratory
> 506 Lorimer Street
> Fishermans Bend  VIC 3207 Australia
> 
> Tel: +61 3 9626 7525
> Fax: +61 3 9626 7089
> 
> IZCC #180


canasters create lag and lots of unburnt fuel restrictions help to a
certian point. Op-amps do the job.

Steve
-- 

                   ----|------||------|----
                     --|------[]------|--
                            0/  \0



:http://www.flash.net/~swagaero