fuel filter fittings

[George M. Dailey]

SAE compression fittings are the holy grail you are looking for. I cut the
tubing an inch or so before the GM fitting add the comp. fitting and you're
ready to tie into any thing.

GMD

At 11:28 PM 10/28/97 -0500, you wrote:
>--------
>
>I'm trying to use a stock GM fuel filter ('88 tpi Camaro) in my
>efi engine swap, but I'm having trouble with the fittings.
>These are the ones with the o-ring seals and seem to be
>metric. Are these called siginaw fittings? I would like to
>put this inline with the steel tubing, but I only have a
>single/double flare tool. What's the best way to connect
>this without buying a new flaring tool nor having a handful 
>of adaptors? (Anyone know, off hand, what one of those tools
>cost?)
>                                       John S Gwynne
>                                          Gwynne.1 at osu.edu
>_______________________________________________________________________________
>               T h e   O h i o - S t a t e   U n i v e r s i t y
>    ElectroScience Laboratory, 1320 Kinnear Road, Columbus, Ohio 43212, USA
>                Telephone: (614) 292-7981 * Fax: (614) 292-7297
>-------------------------------------------------------------------------------
>
>
>
>
George M. Dailey
gmd at tecinfo.com