Weld-L's

[Steve Lamb]

>Don't want to scare anyone, just make sure it is "L" grade stainless ( or
>321 or 347) that you weld on for high temp use.

316L would be more than adequate for this purpose, and probably far more
common than 304L.  There's no need to go to the stabilised versions for the
application discussed here.

Steve Lamb
Department of Defence, DSTO
Aeronautical and Maritime Research Laboratory
506 Lorimer Street
Fishermans Bend  VIC 3207 Australia
Tel: +61 3 9626 7525
Fax: +61 3 9626 7089

IZCC #180