O2 sensor grounding; was O2 sensor 4wire

Greg Woods gwoods at Symtx.com
Wed Sep 3 12:52:52 GMT 1997


> > I saw that someone mentioned a Ford 4 wire O2 sensor.
> > Is there any sensors/brands that would offer me an alternative to
the
> > Toyota 4 wire sensor I have to replace this week?
> > Thank you
> >

> My recollection is that a 4 wire is power and ground for the heater ,
> groundfor the sensor, in case the exhaust system is "floating" and the
> signal for the sensor signal.  A well grounded 3 wire should work, or
use
> the sensor ground to ground the exhaust.

When I first thought about this thread on 4 wire EGO's I thought, "why
would you need that? just use the exhaust as ground"  Then I got to
thinking about how my exhaust is grounded (not good) and I'm thinking
maybe I should convert my retrofitted GM TBI single wire O2 sensor
to a multi wire sensor with a dedicated ground (I have been getting
some intermittant "02 sensor faulty" errors from my ECM, but I thought
it was just freakin out).  So let me ask this stupid question: does
this ford sensor puts out the same 0 to ~1V signal as the GM?  Does GM
not make a multi-wire sensor?  What is the cost of the ford sensor?

oh and one last stupid question: do all injectors use the 18 X 1.5mm
thread?

TIA. and BTW, even with the off topic messages, I love this list!

Greg Woods
gwoods at sytmx.com
austin, tx
86 cherokee w/GM TBI






More information about the Diy_efi mailing list