Upgraded driver

[peter paul fenske]

HI all

Ford has up to 36LBs high impedance injectors..
The SVO cost is quite reasonable..

There are some 50LBs hi z albeit extremely expensive aftermarket..

Most 50 lbs are low z

All you have to do is use sandys LM1949 injector board
and drive it with the gm ecm..

Note though some tbi ecms are current limited and will
drive low z injectors.
These generally have a current loop coming out of the
ecm connector..

L8tr:peter


At 12:59 PM 9/20/97 -0700, you wrote:
>At 12:23 AM 9/20/97 -0400, you wrote:
>>Is there any way to upgrade the injector drivers in a GM computer to drive
>>the low impedence injectors? I've heard the stockers will burn out driving a
>>L Imp. pinjector, but they are so much cheaper than the ACCEL H Imp.
>>injectors.
>>Tom
>>
>>Hi Tom
>
>	Sad to say ford motorsport inj will work in a GM tpi unit at about half
>cost. Spent 225.00 for ford inj as compared to 425.00 Accel's. The inj are
>24 lbs/hr size.
>
>Vance
>
>PS: Don't tell my Chevy friends.
>
>