GM PROM data, where can I get it?

Terry Martin terry_martin at mindlink.bc.ca
Mon Sep 29 07:12:58 GMT 1997


Mark Nowakowsky wrote:

> Cool I have access to a connector with an rs232 port on it.  It's the from the scanner
> at work. I guess now all I need is the pin outs for the rs232 port on my pc... (:

#1 Shield
#2 Transmitted Data
#3 Recieved Data
#4 Request to send
#5 Clear to send
#6 DCE Ready
#7 Signal Ground (Common)
#8 Received Line Signal Detector
#9 Reserved
#10 Reserved
#11 Unassigned
#12 Secondary Received Line Signal Detector
#13 Secondary Clear To Send
#14 Secondary Transmitted
#15 Transmitter Signal Element
#16 Secondary Received Data
#17 Receiver Signal Element
#18 Local Loopback
#19 Secondary Request to Send
#20 DTE Ready
#21 Remote/Loopback Sig.
#22 Ring Indicator
#23 Data Signal Rate Select
#24 Transmit Signal Element
#25 Test Mode

OR
#1 Received Line Signal Detector
#2 Received Data
#3 Transmitted Data
#4 Data Terminal Ready
#5 Signal Ground (Common)
#6 DCE Ready
#7 Request To Send 
#8 Clear To Send
#9 Ring Indicator





More information about the Diy_efi mailing list