1985

[peter paul fenske]

Hi Paul

Check your fuel pump rail pressure and bleeddown.
Pump might be going. 
Also there is a MAF error. Check for 0.5v at idle
at the MAF a/d input to the ecm. 
Burnoff is not a relay but a solid state bosch unit
for 85. 

later:peter

At 02:17 PM 4/13/98 -0400, you wrote:
>Hey Bruce,
>        I was just out with my friend in his 1985 Pontiac TA.  It has a cold
>start problem, and there is a slight hesitation when the trottle is applied.
>Kinda like a car without the accelarator pump working on the carb.  The car
>has 150,000 on it, mods are a Hypertech chip, and a 3 inch Flowmaster cat
>back kit.  I found codes 12(self diagnostics?) 34, 54, 12 again.
>
>Any input?  I also will be calling about the burner, again.  TIA
>
>Paul
>
>
>
>