Output of distributer's magnetic pickup

[Shannen Durphey]

Raymond C Drouillard wrote:
> 
<snip>
> 
> That was indeed the problem with my first try <donning conical hat>.  I
> couldn't get the GM distributer that I pulled the module from to fire it.
> 
> A couple days later, it dawned on me that I need to "plug it in".  I ran
> a wire from an ignition source to the "+" pin, hooked up the Holley, and
> tried it.  It fired the Jacobs ignition, and the Holley dutifully
> injected fuel down the throttle body.
> 
> Still, I can't get the Ford distributer to fire it.  Maybe I'm missing
> something very basic (again)  <:-)

ok...  Need to connect the metal portion of the back to
ground for complete circuit.  Easy to overlook.... : )
Shannen
Shannen