4D installation
Gary Derian
gderian at cyberdrive.net
Fri Apr 17 15:38:25 GMT 1998
The plate increases the plenum volume so each cylinder can pull from all 4
barrels. This makes an underside carb flow better.
Gary Derian <gderian at cybergate.net>
>So wadda y'all think? The 600 cfm carb had a 1" aluminum spacer under it.
> Do I use it w/ the 4D I'm installing? I've forgotten why the spacer is
>there. Is it to improve the metering signal to the carb or is it for
>runner tuning, i.e. to lower the rpm at which peak power occurs? Sheesh.
> Getting old. My CSH is getting rusty.
>
>Mike J.
>
>
More information about the Diy_efi
mailing list