747 vs. 730

[Bruce Plecan]

-----Original Message-----
From: Derek Jewett <jewett at sunset.net>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Monday, April 20, 1998 4:10 PM
Subject: Re: 747 vs. 730


>So between the 747 and the 730, I would believe that would make these two
probably the more common units available for the late 80/early 90's era...

The 747 was used in gm pickups (v-6-8s) from 85-91.
The 730 was used in numerous cars from about the same error.
The 747 uses a 2732, the 730 a 27256.
>
>Derek
>
>> As far as I know the 747 was used for TBI applications and the 730  was
used for TPI, in oem designs.  Depending on the success of the 747 project
hopefully we'll do the 730.
>> Bruce
Again cheers
  Bruce