Replaced Dist ign system with SDI system.......

[Terry]

Roger Heflin wrote:

> There were not numbers showing on the thing.  It is a crank trigger, with
> a magnetic sensor.  The trigger has slots every 6 degrees, and it has a
> area where there are no slots for 4-6 teeth.  You can see a picture of
> the wheel in question at:  http://www.electromotive-inc.com/Camaro.htm
> There is a picture of exactly the wheel I have in these directions.  This
> is also the full directions for the installation of the part.

Roger - does your tach seem to work correctly with the SDI unit
in place?  The above URL mentions that a tach adapter might be
necessary for correct operation....

thanks,

T.