Fw: Bench ecms

[Bruce Plecan]

-----Original Message-----
From: Bruce Plecan <nacelp at bright.net>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Monday, August 17, 1998 8:05 PM
Subject: Re: Bench ecms


>Do all conditions need to be meet, for closed loop?.
>Or just one outta the four?.
>
>Closed loop idle would need to be 00 00 00 00?



>Would   FF 01 01 01 work?.  Ignore this line, on last e-mail.



>
>Cheers
>Bruce
>
>-----Original Message-----
>From: EFISYSTEMS at aol.com <EFISYSTEMS at aol.com>
>To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
>Date: Monday, August 17, 1998 7:04 PM
>Subject: Re: Bench ecms
>
>
>>1227747
>>29E is MPH enable for closed loop
>>29F is TPS enable for closed loop
>>2A0 is open loop rpm off
>>2A1 is open loop rpm on
>>
>>Hope that helps,
>>-Carl Summers
>>
>