Update on 93 Z28 disassembly and question

[Mike]

>
>Hey,
>
<*snip*>
>
>Another things I have not been able to find, I have found where it
>sets the TCC lockup bit ($0066), but I have not been able to find
>where it actually sets an output bit to make the TCC lockup.  I did a
>quick scan of all code reading $0066 (obvious addressing), and checked
>to see if something set things in the $10xx range based on the
>settings in $0066, and I did not find anything.  Anyone have any ideas
>on what I am missing?
>

Try looking at the logic starting at D1C9. I suspect the TCC is controlled
here though I've never seen a PWM output at $4008 :)


-----
 Mike
94PGT
http://www.golden.net/~trinity