VSS

[Stuart Bunning]

whats a "vac referrenced FPR"

At 08:43 AM 21/12/98 -0500, you wrote:
>
>-----Original Message-----
>From: Stuart Bunning <stuart at kenelec.com.au>
>To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
>Date: Monday, December 21, 1998 12:51 AM
>Subject: VSS
>
>I'd look for a inline speedometer device, that generates the signal.
>Barring that then just disable the malfunction flag.
>The flames help soften the decals and make then easier to get off.
>If your running a vac referrenced FPR then I can't see where there
>would be alot of fuel during overun anyway.
>Reducing the timing at the 20 K/Pa level at over 1500 rpm would help
>Bruce
>           Martha Stewart still hasn't responded to designing a center
>           piece for Dinner here at CSH, HQ.....
>
>


Best Regards,

STUART BUNNING
SALES ENGINEER
KENELEC PTY LTD

23-25 REDLAND DRIVE
MITCHAM VICTORIA 3132
AUSTRALIA

PHONE:  61 3 9873 1022
FAX:    61 3 9873 0200
EMAIL:  stuart at kenelec.com.au
WEB:    http://www.kenelec.com.au/