BUICK 3.8L DIS OUTPUT VS CYLINDER

[TBK]

I can work with this, thanks!

TK
-----Original Message-----
From: Shannen Durphey <shannen at mcn.net>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Tuesday, February 17, 1998 1:21 AM
Subject: Re: BUICK 3.8L DIS OUTPUT VS CYLINDER


>
>
>TBK wrote:
>
>>    Which coil output goes to which plug.
>>
>> TK
>> -----Original Message-----
>> From: Scott Shotton <stucky at interaccess.com>
>> To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
>> Date: Monday, February 16, 1998 9:24 PM
>> Subject: Re: BUICK 3.8L DIS OUTPUT VS CYLINDER
>>
>> >What are you looking for?  The firing order? Avaliable KV?
>> >
>> >I can probably find what you need but you need to be specific so I din't
>> >type a basic DIS class.
>> >
>> >I am asuming this iss a 3.8L VIN C (3800).  If not, let me know.
>> >
>> >Scott
>> >
>> >
>> >TBK wrote:
>> >>
>> >> Anybody know the DIS coil output vs cylinder number spark plug wire
>> >> routing.
>> >>
>> >> In otherwords, which coil output is which (what).
>> >>
>> >> Terry K
>> >
>
>  Was hoping to find a good picture to send, but I don't have one here.
>Anyway, cyls. 1&4, 5&2, 3&6 are together.  If you can take the coil pack
off
>the module, yellow/black (underneath) is connected to #1&4,
green/black=2&5,
>blu&black=3&6.  Hope this helps.
>
>Shannen
>
>