general cam question

[Shannen Durphey]

ECMnut at aol.com wrote:

> In a message dated 98-02-20 03:19:43 EST, you write:
>
> <<
>  Generally, advancing the cam increases cranking vacuum and low end
>  response >>
>
> Thanks, I better check my degree wheel....
>  I advance it 4 deg & lost idle vacuum....
> ECM isn't taking it well at all...
>
> Mike V.

  And generally speaking when advancing the cam if you start to lose
cranking vacuum and low end response your cam was where it should have
been. ; )