KISS System

[xxalexx at ix.netcom.com]

> From:          Robert Humphris <r.humphris at indigo-avs.com>
> To:            "'diy_efi at efi332.eng.ohio-state.edu'" <diy_efi at efi332.eng.ohio-state.edu>
> Subject:       RE: KISS System
> Date:          Mon, 23 Feb 1998 14:30:25 -0000
> Reply-to:      diy_efi at efi332.eng.ohio-state.edu

> >>     I may be stupid about electronics, but it seems to me that most of
> >> the EFI systems out there are way too complex.  Anybody out there
> >> building a KISS EFI system that doesn't require operator intervention?
> 
> I am working on something like this, using a 7 input AtoD converter
> taking:
> , a potentiometer for the throttle position, an 02 sensor, a temperature
> sensor.
> and using a PLD to provide the pulse for the opto isolator controlled
> injectors.  This should be a 3 chip low cost design which will be better
> than carbs, but not as good as EFi..  It is designed to replace carb set
> ups.
> 
> Rob Humphris
> >
> >
I saw Formula Fords use this in early 80's used TPS and injectors.
Alex