info about Honda UEGO sensor
Land Shark
lndshrk at xmission.com
Wed Feb 25 06:06:11 GMT 1998
At 09:51 PM 2/24/98 -0500, you wrote:
>Well I thought of that too but it turns out there is a calibration
>resistor that calibrates the box to the sensor so it unfortunately
>will not work. The value of the resistor goes over a fairly wide
>range so I think the potential errors are probably significant.
I thought that the "calibration resistor" was 2 of the seven wires
on the NGK sensor.. and inside the plug of the Honda one..
Jim
More information about the Diy_efi
mailing list