Chrsler Smecs

[Jim Davies]

On Mon, 19 Jan 1998, Chad Clendening wrote:

> The shadow ECM had a motorola processor, 52 pin PLCC, 2 hitachi 6321
> interface chips, a few other DIP's, one power zip package, and a to-220
> package device.  All of the high power drivers were on a seperate
> board above the processor board.  
> 
> This may have been out of a 86 but I thought the guy said it was an 87.
> 
> The processor power pand crystal pins matched those of a 6811 a8 or e9.
> 
> Chad
> 
IIRC, the pre 87 Chrysler stuff used 2 seperate modules, the 87 used a
SMEC, that is both parts in one housing and post 87 used a SBEC,
everything integrated on one board. The 87 I have has a 6811 on it.

> 
Jim Davies