ALDL

[David Piper]

Hi Gene

I also need this info. Let's share.  Hey, I'm in Greenville, SC. Where r u?

TurboDave

At 04:06 AM 6/30/98 -0400, you wrote:
>Hi guys, I am a newbie to this list....
>I am an old electronics man from the vacuum tube days....;-(((
>
>I have done a brief stint in the early 80's as an r/d prototype tech... tons of
>fun....chip galore...analogue mostly....
>and so I missed the computer revolution....untill ~97 when I bought my
first p/c
>
>I managed to adapt a caddy FI direct port system, by Bendix, onto an old
Pontiac
>455...and it ran like a champ untill the old caddy analogue computer died....so
>i'ts back to a carb for now....maybe I can do another direct port FI system in
>the future....
>
>Question i have is this, really....I have an old '72 vette that I put a hotrod
>version of a 350 chevy in...with a 1227730 computer running it hotrod
>style....closed loop with a heated O2 sensor on the pass. header collecter....I
>used a $30 cheaper Mopar O2 sensor BTW,....works fine...
>
>SO the question is how do I get a copy--bootleg is ok== of the diacom software?
>and what sort of portable p/c do I need to run it?  and how does a chip burner
>work?   I want to check up on the operating parameters of the computer and it's
>aftermarket hotrod chip...and modify the chip as necessary to make sure the
>engine is putting out max power...it starts and runs fine....:-))
>with a schematic I can obviously wire up any connecters necessary...assuming a
>source for them....any help out there?  
>
>GENE SLATER
>
>