Daewoo DELCO FI box

[Matt Tomlins]

Wouter
Those numbers don't look like anything in my 808.
The 808 is based on a custom 68HC11
Matt


-----Original Message-----
From: Wouter de Waal <wrm at ccii.co.za>
To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
Date: Monday, July 20, 1998 6:20
Subject: Daewoo DELCO FI box


>Hi all
>
>I finally got a chance to rip into the FI computer on my wife's Daewoo
>Cielo. Justin in Australia previously said that he found a standard DELCO
>808, but with different code, in an daewoo over there.
>
>So, just to make sure
>
>              -----------------------------------
>              |                 8.388   u4      |
>              |         u5      xtal   16202476 |
>              |       04891                     |
>              |                                 |
>              |                                 |
>              |                  u7      EPROM  |
> connectors   |                70337625         |
>              |                 21002           |
>              |                                 |
>              |                                 |
>              |                    u10          |
>              |                   9645          |
>              |                                 |
>              -----------------------------------
>
>
>The EPROM is in a blue carrier of some type (note, this is the first time
>I've seen a non-bosch EFI computer) The EPROM sticker sez DELCO BWJT 0723.
>
>So, is this a Delco 808? Also, what processor? I thought it was supposed to
>be 8031, but is disassembles to nonsensical code.
>
>Thanks all
>
>Wouter
>
>