700R4 bptest

[Eidson, Mark]

Do similar manuals exist for AODs?  me


______________________________ Reply Separator
_________________________________
Subject: Re: 700R4   bptest
Author:  "Mike Hoenes" [SMTP:MHoenes at dhr.state.nc.us] at MSXGATE
Date:    6/30/98 4:18 AM


ATSG makes a manual that lists all the upgrades. it is available at parts 
stores that specialize in tranny parts. it has all the GM part numbers & 
retrofit info. at $10, its a deal. while you are at it, get the Techtran 
rebuild manual also.
 ----------
From: Brian Hartman
To: diy_efi at efi332.eng.ohio-state.edu 
Subject: Re: 700R4   bptest
Date: Mon, Jun 29, 1998 3:40PM

I want to thanx for the help on upgrading the older 700r4's.  I have the 
books
and know what to do but some of the post are helping narrow it down.  ALL of

the
performance mods that people are listing are in my manual but the older to 
newer
upgrades is what I'm working on.  I will make it available on FTP soon so 
you
all can use it.  Thanx for the help.  I'll be done soon,

Brian

owner-diy_efi at efi332.eng.ohio-state.edu wrote:

> change the front & rear sprags to new design. make sure that you have a 10

> vane pump. fairbanks billet 2-4 servo is nice too. corvette stock 
converter
> has 2000 rpm stall. nice for the street. 
>
> mike
>  ----------
> From: Brian Hartman
> To: diy_efi at efi332.eng.ohio-state.edu 
> Subject: Re: 700R4   bptest
> Date: Sat, Jun 27, 1998 5:51PM
>
> You might want to get a VB spring kit from Fairbanks to make sure your 
Valve
> Body is up to snuff.  Remember to take your Pump to a tranny shop and have

> the
> 9/32" hole drilled throughout the oil return to aleviate pressure behind 
the
> pump seal.  If you need help when you are in the middle of it just ask. 
If