[blown] DFI pinouts + conversion to 89 GM 165 harness

[Andris Skulte]

Andris Skulte wrote:
> 
> Pin A is only wired to the fuel pump positive (the separate red/white
> wire
> Pin B is a general battery ground
> Pin C is general battery +12V

OK. I'm replying to my own mssage... Pin C is the O2 signal, and not
connected to the battery...
The o2 sensor gets its 12V power from the fuel pump.

Andris -blinded with cone shaped hat over eyes (the DIY_efi guys will
get this, atleast!)