Intro & Question

[Joe Gervais]

I joined this list last week, and thought I'd introduce myself.  Other than a 4
banger Toyota PartsRunner that I've had for the last 9 years, and let the
dealer do all the service on (wife's wagon), I'm new to fuel injection, but
learning fast.  I'm currently doing a body off restoration/reconstruction of a
1961 Corvette, and ditching the carburated 283 for a 93 Vette LT1. I've
modified the  harness on my own after studying the Helm manual for days. The
Vette is also getting a new suspension courtesy of the same wrecked 93 Vette.
I've got a web site of the project with lots of pictures and some real fuzzy
ECM schematics for what's left of the harness into my 16159278 ECM. It's at
http://reality.sgi.com/gervais/bodyoff.html

The programming 101 project seems real interesting.  If I can get my buddy to
spring for a TPI setup for his 33 Ford Roadster he's building, I may be able to
pitch in when you get to the 730 phase. Otherwise I'm pretty much useless until
you need LT1 test fodder.

It looks like Programming 101 will get some detailed knowledge of the early TPI
motors. Anyone have existing info on the 92-93 LT1s?  I saw an old post in the
archives on the table with the VATS bit for 93-95 ECMs. I'm looking for this
info for a 93 16159278 ECM and also interested in table differences between the
Y car and F body CAL PACs for that ECM. I've got BINs for both types, just need
to decipher the table with VATS.

Joe

-- 
_________________________________________________________________________
Joe Gervais                   gervais at sgi.com
Product Manager               (650) 933-7479 voice
High Performance Networking   (650) 964-0811 fax
Silicon Graphics              www.sgi.com

2011 North Shoreline Blvd, Mail Stop 08L-855, Mountain View, CA 94043-1389