Motorcycle EFI? [was: cam timing}
rbraun at mail.enter.net
rbraun at mail.enter.net
Mon Mar 30 17:38:55 GMT 1998
I'm working with my cousin who's considering the same thing. Here's
the problem: injectors small enough. You only have 250cc per
cylinder. FI bike are rare and no car is small enough.
> When I was racing motorcycles, we would advance the intake cam one
> tooth. That brought some very interesting results. It sure made the
> bottom end more noticeable. The 1/4 mile time didn't change but the 1/8
> mile and 0-70 time went down IF I could keep the tire from spinning.
>
> But how would cam timing change the requirements for EFI??? Isn't the
> fuel still delivered at the same time, at the same amount?
>
> Now, Am I too naive to think that I can find a small car engine with
> about the same specs, make an adapter (or new intake manifold), and
> mount the EFI to the bike engine? Depending on the donor vehicle, I may
> be able to put the distributor on the bike, too. In my case it's a
> 1075cc, 4 cylinder, Kawasaki that puts out about 125 Hp.
>
> I know that it will take some time to work out the mechanical bugs but I
> can do that. It's the software that I'm worried about. What are the
> odds that my custom, one of a kind, PROM gets fried and I can't find
> another one. If it was a stock chip, it should be easier to get.
>
> It might be a waste. The bike moves very well now with 4 carbs and
> points. I just thought it might be a nice project.
>
> Any comments, or suggestions?
>
> TIA,
>
> FEF
> __________________ Reply Separator _________________________________
> Subject: cam timing
> Author: Jeremiah Mahler [SMTP:jeri at shocking.com] at MSXGATE
> Date: 3/27/98 12:33 PM
>
>
> I know a person that I went to school who had a first generation Honda
> CRX. He supposedly retarded the cam by installing the timing belt with
> an offset of one tooth. He said this gave it a definite improvement in
> high end as well as an overall increase in output. Has anyone ever done
> this, or heard of this being done on similar cars?
>
> Jeremiah Mahler
>
>
Randy Braun rbraun at enter.net
91 GTA
82 Firebird
More information about the Diy_efi
mailing list