91 IROC L98 Bin file Offset question

[TBK]

It's (very likely) the experimental byte. If AA, checksum is ignored. Unless
the ECM ignores VATS when the exp byte is set, it has nothing to do with
VATS. I don't believe setting the exp byte will disable VATS.

TK
-----Original Message-----
From: Peter Jaramaz <pjaramaz at ingenico.com.au>
To: 'diy_efi at efi332.eng.ohio-state.edu' <diy_efi at efi332.eng.ohio-state.edu>
Date: Wednesday, May 13, 1998 4:11 PM
Subject: RE: 91 IROC L98 Bin file Offset question


>Anyone tell me what offset 008 in the '808 is for. Its a config flag but so
far only worked out one bits for Auto / man.......
>
>Cheers,
>PJ
>
>
>----------
>From: Mike Hoenes
>Sent: Thursday, May 14, 1998 1:35 AM
>To: diy_efi at efi332.eng.ohio-state.edu
>Subject: 91 IROC L98 Bin file Offset question
>
>For a 1227730 ECU -
>Comparing a stock file to a VATS disable file there are only two
>differences.
>One is at 0016 - which the stock 10 is changed to 00 (i understand that
this
>is the VATS/NOVATS flag )
>The other is at offset 0008.  Stock is 8D, the VATS disable file has AA.
>Can anyone tell me what offset 0008 is for?
>Also, does anyone have a map to the offsets to disable warning codes for a
>730?
>
>TIA
>
>mike
> -
>
>
>