Haltech F3
Steven Gorkowski
kb4mxo at mwt.net
Sat May 16 14:27:16 GMT 1998
My F3 sensors stays at 43k ohms no matter what temp. It is using zener
temp sensor in both non standard to gm . Throttle position sensor has
three colors here are the (note it's not the same as GM) .
color normal pos wot
green /black 310 ohms 3.7k ohms
orange/black 3.7k ohms 3.7k ohms
orange/green 3.7k ohms 0 ohms
Bruce Plecan wrote:
> From: Graeme Wellington <brideson at gateway.net.au>
> Subject: Re: Haltech F3
>
> >> . Does anyone know where I can get sensors with similar
> >> response characteristics? Apparantly they are not GM units.
> >> Matt Beaubien
> >> mbeaubie at gpu.srv.ualberta.ca
> >
> >For what it may be worth, Haltech F9 sensors for temperature
> >have the following temp/reistance specs. (both air intake and
> >coolant sensors)
> >
> >deg F deg C ohm
> >
> >210 100 185
> >160 70 450
> >100 38 1,800
> >70 20 3,400
> >40 4 7,500
> >20 -7 13,500
> >0 -18 25,000
> >-10 -40 100,700
> >
> >Graeme Wellington
> >
> Those are the same values that I show for the GM, IAT, and Coolant
> HTH
> Bruce
More information about the Diy_efi
mailing list