Diacom

[xxalexx at ix.netcom.com]

> From:          Carlo Putter <cputter at sed.sun.ac.za>
> To:            "'diy_efi at efi332.eng.ohio-state.edu'"
>                <diy_efi at efi332.eng.ohio-state.edu>
> Subject:       RE: Diacom
> Date:          Tue, 3 Nov 1998 12:59:31 +0200
> Reply-to:      diy_efi at efi332.eng.ohio-state.edu

 I do not have the address, but am also interested, more so in the 
physical interface module between the car and the PC serial port. 
Does anybody have a handdrawn schematic??

Here is a  previous post from archives
alex
> 
> http://www.coil.com/~apollo/diacom/crack.html
> > 
> > A written desription in ..../crack.html said you need the
> > other half of the cable.(WARNING: Offensive language used)
> > alex p.
> >  
> > > I wired up that exact diagram and found it to not work.  The
> > > laptop detects the interface, but that's as far as i ever got
> > > with that design.  I am trying to communicate with my 7730 ecm. 
> > > I fooled with it a bit last night and gave up.  
> > > 
> > > 
> > > 
> > > ---Raymond Brantley <gt40 at home.com> wrote:
> > > >
> > > > Hey guys I found this while surfing around. Don't know if it
> > > > will
> > > answer any
> > > > questions....
> > > > http://www.coil.com/~apollo/diacom/schem1.jpg