Questions about Big Block Chevy Tall Deck Engines

[ECMnut at aol.com]

In a message dated 11/7/98 4:55:04 PM Eastern Standard Time, sganz at wgn.net
writes:

> I don't remember if the rods were longer in the Truck motors, but I know
>  that they used a 4 ring pistons and that was the reason the extra height
>  was needed in the deck. I don't thing the deck was 1" taller, less, but not
Yep, you ar right, now that I think about it... They had a lower pin placemnt,
not a longer rod... The long rod comes into play when using std pin height
pistons..
MV