MasterTune

[andy quaas]

So this software already knows where all the tables are in the eproms
of many different ECMs?  It just happens to go off of the ID in the
eprom, right?  So if i wanted to use a 1227730 to run a 502 BBC, this
software would let me edit the eprom image without reverse-engineering
the thing?

Andy Q


---Mark Romans <romans at pacbell.net> wrote:
>
> The basic Master Tune is somewhat limited.  It does however give you a
> start.  It gives you control of the constants such as rpm and speed
> limiters, cooling fan on and off temps,  VATS on or off, veh speed
> diagnostic on or off. Spark map, a bunch of fuel maps, (You only
really need
> the one for Power Enrichment Vs rpm).  It is tied to the prom id and
type,
> only works for that application.  If you change the prom id on
another prom
> you want to read, it will read it but unless the application is
exactly the
> same the data you are looking at is junk because stuff isn't in the
same
> place.
> Mark
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com