GM 1bar MAP will it see any boost?
Robert W. Hughes
rwhughe at hal-pc.org
Wed Nov 18 15:04:30 GMT 1998
This is the response I measured on a GM 2bar MAP sensor a couple of
years ago:
Pressure Output
25inHg 0.29v
20inHg 0.72v
15inHg 1.15v
10inHG 1.52v
5inHg 1.96v
0inHg 2.37v
5psig 3.27v
10psig 4.03v
15psig 4.9v
Since the sensor runs on 5v you would expect overpressure output to
flatten out at slightly less than 5v.
--
Robert W. Hughes (Bob)
BackYard Engineering
Houston, Texas
rwhughe at hal-pc.org
More information about the Diy_efi
mailing list