95 Camaro PCM scanner

[Bruce Plecan]

-----Original Message-----
From: Ken Kelly <kenkelly at lucent.com>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Tuesday, November 24, 1998 4:18 PM
Subject: Re: 95 Camaro PCM scanner

What color are they and how many pins?.  This may take a few tries to get
right, are you wanting harness, or ecm header or both?.
Bruce


>I would like to build a test fixture for the 94-96 camaro
>PCM, so I can work with Daves scanner and try to learn to
>program this PCM. I can't find connectors for this PCM.
> Does anyone know a source for Connectors for the 8051 PCM?
>I haven't been able to match them, and my local wrecking
>yards want over $100 for the harness. I am trying to find a
>bad engine harness, possible from and engine fire, or a
>source for the connectors so I can set up a workbench for
>the 8051.
> If I can build a fixture that will power and provide basic
>inputs to the 8051, It will be much easier to try to learn
>to reprogram this PCM. 
> Ken
>
>Dave Hempstead wrote:
>> 
>> I've uploaded my 95 Camaro scanner code, schematic, and a274 PCM
>> document.  It is located at:
>> ftp://efi332.eng.ohio-state.edu/incoming/95Camaro.zip
>> 
>> Enjoy!!!
>> 
>> Dave Hempstead
>> dave_hempstead at hp.com
>