Injectors and resistors (and i'm back)

[Bruce Plecan]

-----Original Message-----
From: Joe Boucher <BoucherJC at lmtas.lmco.com>
To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
Date: Tuesday, November 24, 1998 4:17 PM
Subject: Re: Injectors and resistors (and i'm back)


>Does Accel have a web page?

www.mrgasket.com/accel.htm

No but Mr gasket has one that includes them
Bruce
>
>Joe Boucher
>'70 RS/SS Camaro  '81 TBI Suburban
>
>
>> From: "Walter Sherwin" <wsherwin at idirect.com>
>> Date: Mon, 23 Nov 1998 22:30:15 -0800
>> Subject: Re: Injectors and resistors (and i'm back)
>>
>> Just a thought starter..................Accel have a new product called
>> "VIC" which is short for Variable Injector Controller.  Basically, it has
>> two input channels which can in turn trigger four 1A/4A  peak&hold
channels
>> each.  Also, each channel has a gross pulse width adjustment knob, which
can
>> facilitate individual cylinder trim, even in bank fire mode!  This could
be
>> a simple "plug-n-play" solution to the game of matching unintended
>> controllers and injectors.  However, it won't work with sequential
>> injection.
>>
>
>
>