Injectors and resistors (and i'm back)

[Greg Hermann]

>mrgasket.com
>
>Does Accel have a web page?
>
>Joe Boucher
>'70 RS/SS Camaro  '81 TBI Suburban
>
>
>> From: "Walter Sherwin" <wsherwin at idirect.com>
>> Date: Mon, 23 Nov 1998 22:30:15 -0800
>> Subject: Re: Injectors and resistors (and i'm back)
>>
>> Just a thought starter..................Accel have a new product called
>> "VIC" which is short for Variable Injector Controller.  Basically, it has
>> two input channels which can in turn trigger four 1A/4A  peak&hold
>channels
>> each.  Also, each channel has a gross pulse width adjustment knob, which
>can
>> facilitate individual cylinder trim, even in bank fire mode!  This could
>be
>> a simple "plug-n-play" solution to the game of matching unintended
>> controllers and injectors.  However, it won't work with sequential
>> injection.
>>
Can you pick and choose which input channel controls which output
channel(s)?? If so, how?? And, most importantly--can you change whether an
input controls one or two output channels ON THE FLY--as in with turning
on/off a low level digital output??

If some combo of these possibilities is possible, and price is right, four
of these things might be just the thing for staging injectors (sequential)
on a V-8!??!!

Regards, Greg