Programming 101 web page

Steve Ravet steve.ravet at arm.com
Tue Oct 13 14:40:53 GMT 1998


Jason Weir wrote:
> 
> Oops for the typo.... try 3c7 to cd7

Another typo?  3c7-cd7?  That can't be right.  That overlaps the rest of
the tables, plus some of the code (code starts at 0x617 to the end).

The table as listed on the WWW page is from 0x3c7 to 0x3d7, which is 16
bytes.

--steve

> 
> > The size is what looks odd for corrections.  037C to 03D7,
> > That's like 90 addresses, for a fuel correction by rpm?.
> > Bruce
> >
> > >Just to check it again, I set the 5 low end values to 100 (dec)  and
> > the
> > >blm went to 115, then I set the same values to 1 (dec) and the thing
> > >would not even run.... can anyone else confirm this... Jason
> > >
> > >> That don't look right.
> > >> Bruce
> > >> >
> > >> >Steve,
> > >> >    I have done some more investigating and with Carl's help, I
> > have
> > >> >found that that table from 0x37c - 0x3d7 is a fuel constant...
> > >> Changing
> > >> >the lower values affects BL#'s at idle.  it also affects WOT
> > AFR... I
> > >>
> > >> >think it is a constant by RPM.. Now the question being where is
> > the
> > >> WOT
> > >> >fuel enrich????
> > >> >
> > >> >--
> > >> >Jason Weir
> > >> >88 Wrangler - 258 Chevy TBI
> > >> >Fayetteville, North Carolina
> > >> >http://home.att.net/~jweir/tbi/inject.htm  --- TBI Installation
> > Page
> > >> >mailto:jweir at att.net
> > >> >
> > >> >
> > >> >
> > >
> > >
> > >
> > >--
> > >Jason Weir
> > >88 Wrangler - 258 Chevy TBI
> > >Fayetteville, North Carolina
> > >http://home.att.net/~jweir/tbi/inject.htm  --- TBI Installation Page
> > >mailto:jweir at att.net
> > >
> > >
> > >
> 
> --
> Jason Weir
> 88 Wrangler - 258 Chevy TBI
> Fayetteville, North Carolina
> http://home.att.net/~jweir/tbi/inject.htm  --- TBI Installation Page
> mailto:jweir at att.net

-- 
Steve Ravet
steve.ravet at arm.com
Advanced Risc Machines, Inc.
www.arm.com



More information about the Diy_efi mailing list