scan tools and WOT

[Bruce Plecan]

-----Original Message-----
From: Stuart Bunning <stuart at kenelec.com.au>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Wednesday, October 14, 1998 12:29 AM
Subject: Re: scan tools and WOT


>
>
>oK
>
>SO WHAT'S 10K RESISTOR MODE CALLED ??? NORMAL FIELD SERVICE ???

According to the 86 OTC 2000 manual, it's called Diagnostic
Assembly Line Check Link (ALCL).
Also,  EFI gm vehicles will add extra spark when ALCL commanded, to allow
for ESC tesing.  "Vehicles must no be
driven in the ALCL Mode).
Cheers
Bruce
>
>
>>
>>You've got ALDL, Diagnostic, Normal, and System Back-up.
>>For home mechanic use,  just use Normal, and learn what all is
>>avalable, to use..  Once you have a grasp of that then the others
>>will make more sense.  I'm still at Normal, and just work with that.
>>After a couple hundred hours of one eye driving it will get easier.
>>one eye on the scanner, one eye on the road.  Makes the drive
>>to/from work more interesting.  Once you become one with the
>>scanner and your car, all the little blips get real apparent.
>>Cheers
>>Bruce
>
>
>Best Regards,
>
>STUART BUNNING
>SALES ENGINEER
>KENELEC PTY LTD
>
>23-25 REDLAND DRIVE
>MITCHAM VICTORIA 3132
>AUSTRALIA
>
>PHONE:  61 3 9873 1022
>FAX:    61 3 9873 0200
>EMAIL:  stuart at kenelec.com.au
>WEB:    http://www.kenelec.com.au/
>
>