Small injectors

[mrvette]

Yeh, your rite,  I messed up, I was going on a recollection....

well my buddy with the Mitsu engine can't seem to get more than 90 hp from his
1600 engine,  and looses because of power....oh well....GENE

Francois Dion wrote:
> 
> mrvette wrote:
> 
> > I find it somewhat amazing that even with 35 years of development work it's
> > still very difficult to find a factory production engine capable of making one
> > hp. per cubic inch....about ~80 percent of that goal is the most attained
> 
> Not the case. Most 4 cylinders worth their weight are well over 1hp per ci.
> All you are asking for is 61 hp per 1000cc.
> 
> > ...1.6
> > liter is ~130 ci, as I recall
> 
> 1.6 is 97.6 ci. 100 hp is fairly common from that size.
> 
> For example my Peugeot 405 Mi16, in stock form, US specs
> (10 hp less than it's euro counterpart):
> 1.9L (115.9 ci) develops 150hp. Normally aspirated.
> 
> Ciao,
> Francois Dion (francois at hyperreal.org)
> --
> Member: FLU #1722, PCNA
> http://www.fortunecity.com/silverstone/zagato/101/launch.html
> Alfa Romeo, Fiat, Lancia, Peugeot, Volvo, Solex

-- 


                                ____________
Fun under the sun in          //~~~~~~~~~~~~\\
Jacksonville, Fl.  :-)))     //______________\\
                       /~~~---~   |      |   ~---~~~\
                      /|    /______\____/______\    |\
                    (( | /      |          |      \ | ))   
     Mako 'Vettes    | \============================/ |   
 Shift better with   |\ \\[  ]    |mrvette|   [  ]// /|
     Automatics      | \/+========================+\/ |
                     |~==============================~|
                     |_____|                    |_____|
-------------------------------------------------------------------