return line to gas tank
Greg Hermann
bearbvd at sni.net
Fri Oct 23 03:07:39 GMT 1998
>Greg Hermann wrote:
>
>> >But what is there is only 5 gal in tank and the fuel is already at 95F? The
>> >SX pump used to seize then release due to its high flow and current.
>> >
>> >TurboDave
>> >
>> Couldn't agree more, Dave, but I still think you are getting a LOT more
>> heat elsewhere!
>>
>> Greg
>
>Another .02--- I agree and keep the heat in the engine where it belongs. My 406
>makes 430 HP and the side pipes are within 1" of the foot boxes and 1/2" of the
>body and it doesn't get hot enough to scorch the paint..... entire exhaust and
>headers HPC coated inside and out and the heads and pistone are ceramic
>coated. I
>ran 75 mph for four hours and you could still touch the floor whith your
>hand, it
>was only warm.
>
>Regards Tom
Amen, Bro--and don't let 'em forget that keeping more of that heat in the
chamber longer makes for more power and better mileage all at the same
time, as well as letting you get by with less radiator and longer oil
change intervals! Coatings are great stuff, all around!!
--G.
More information about the Diy_efi
mailing list