Making Port Style Injection bye bye Webers
Clive Apps Techno-Logicals 416 510 0020
clive at problem.tantech.com
Wed Sep 9 17:06:27 GMT 1998
>
> there is a product called Moroso A/B Poxy, or Racer-Poxy
> that may be useful to you in making your injector bosses.
> It comes in two sticks. You mix 50/50 and then shape it
> like clay. In 24 hours, it's rock hard and ready to machine.
> I've used it to add material where needed in the
> intake ports. You can grind it, drill it, tap it, etc.. I ordered
> it from Summit racing for around $25 US. It stands up to race
> gas and 220 F temps.. NHRA Super Stock racers use
> it pretty extensively to reshape intake ports. Their rules
> require the port to measure out to the same volume as the
> factory port, regardless of shape.. . So they fill & grind" till
> the flow bench wears out... If someone knows
> of a *generic equivilent* material, I'd love to learn about it.
JB Weld metalic epoxy
supposed to be good enough to use in ex ports but never tried it
Clive
More information about the Diy_efi
mailing list