September 1998 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Sep 1 00:03:15 GMT 1998
Ending: Wed Sep 30 23:59:00 GMT 1998
Messages: 910

• Turbocharging a natural gas engine   Clive Apps Techno-Logicals 416 510 0020
• Making Port Style Injection bye bye Webers   Clive Apps Techno-Logicals 416 510 0020
• Rotary firings   Clive Apps Techno-Logicals 416 510 0020
• What size injector?   Clive Apps Techno-Logicals 416 510 0020
• 2x8bit to 16bit file?   BSR AB
• Desperate!!!!!!   BSR AB
• test   Justin Albury
• ECMs   Dave J. Andruczyk
• L-Jetronic or LH-Jetronic for 77 mgb ? & ford tempo throtle b   BUTLER, Tom
• Disassemblers   Bailey, Robert B.
• Auto Book   Stuart Baly
• Felpro EFI review   Matt Beaubien
• Reversing the '8625   Matt Bossard
• Caddy 472-500   Matt Bossard
• Injector Sizing: REALLY dumb question   Joe Boucher
• ESC diagnostic   Joe Boucher
• DIY_EFI Digest V3 #410   Joe Boucher
• it's dead, jim   Joe Boucher
• DIY_EFI Digest V3 #412   Joe Boucher
• DIY_EFI Digest V3 #417   Joe Boucher
• ALDL description page   Joe Boucher
• DIY_EFI Digest V3 #422   Joe Boucher
• Schematic help   Joe Boucher
• DIY_EFI Digest V3 #424   Joe Boucher
• Motronic?   Joe Boucher
• DIY_EFI Digest V3 #425   Joe Boucher
• DIY_EFI Digest V3 #425   Joe Boucher
• Diacom   Joe Boucher
• Emulate   Joe Boucher
• VSS & 730 ECM   Joe Boucher
• DIY_EFI Digest V3 #433   Joe Boucher
• RCA 1802 disassembler   Joe Boucher
• HC11 disassembler wanted   Joe Boucher
• knock retard   Joe Boucher
• DIY_EFI Digest V3 #438   Joe Boucher
• DIY_EFI Digest V3 #445   Joe Boucher
• Alain Toussant   Frederic Breitwieser
• Schematic help   Frederic Breitwieser
• DIY_EFI Digest V3 #424   Frederic Breitwieser
• HC11 disassembler wanted   Frederic Breitwieser
• ECMs   Frederic Breitwieser
• assmeblers and disassemblers   Frederic Breitwieser
• assmeblers and disassemblers   Frederic Breitwieser
• Non-GM knock sensor Q   Tony Bryant
• [cl] Knock Modules - LT1   Tony Bryant
• Emulate   Stuart Bunning
• Emulate   Stuart Bunning
• Inlet manifold runner length   Stuart Bunning
• Inlet manifold runner length   Stuart Bunning
• Inlet manifold runner length   Stuart Bunning
• VSS importance   Stuart Bunning
• Información   Javier Calle
• it's dead, jim   Carmine
• Injector Clean   Wen Yen Chan
• heat sinks and alt repair question   Wen Yen Chan
• eec-iv high idle problem   Chief
• 1802 Hacker Question   Steven Ciciora
• air-assisted injectors, sort of   Chris Conlon
• air-assisted injectors, sort of   Chris Conlon
• MAF vs MAP   Chris Conlon
• Injector Clean   Chris Conlon
• 1995 Buick Lesabre PCM help   David A. Cooley
• Calculating the Checksum   David A. Cooley
• speed sensor from a GM TBI system 85 sunbird ?   David A. Cooley
• GM PCM Info   David A. Cooley
• Additional 68HC11 Registers?   David A. Cooley
• PCM help   David A. Cooley
• DIY_EFI Digest V3 #425   David A. Cooley
• VSS & 730 ECM   David A. Cooley
• Lamba sendor readings - advise needed   David A. Cooley
• Blown Water pump   David A. Cooley
• 68HC05 Eval board needed...   David A. Cooley
• HC11 disassembler wanted   David A. Cooley
• Calculating the Checksum   David A. Cooley
• which 3 wire O2 sensor ?   David A. Cooley
• which 3 wire O2 sensor ?   David A. Cooley
• assmeblers and disassemblers   David A. Cooley
• fuel module   David A. Cooley
• Talking to my PCM!   David A. Cooley
• GM Cross Fire Injection For Sale   Kevin Crain
• TPI on a 305   Kevin Crain
• GM TBI info needed   Kevin Crain
• GM Cross Fire Injection For Sale   David
• ID the flaring tool...   David
• Caddy 472-500   Jim Davies
• Injector Sizing: not dumb questions at all   Gary Derian
• air-assisted injectors, sort of   Gary Derian
• Fuel Curves   Gary Derian
• O2 sensors pre- and post-cat   Gary Derian
• Rotary firings   Gary Derian
• Tech info   Gary Derian
• 327 GMC   Gary Derian
• Caddy 472-500   Gary Derian
• Caddy 472-500   Gary Derian
• One Bar?   Gary Derian
• Blown Water pump   Mike Dillon
• ID the flaring tool...   Mike Dillon
• assmeblers and disassemblers   Mike Dillon
• assmeblers and disassemblers   Mike Dillon
• [cl] Knock Modules - LT1   Mike Dillon
• More VSS   Mike Dillon
• Synthetic Oil   Francois Dion
• boost presser and power gain   Raymond C Drouillard
• Información   Raymond C Drouillard
• Moroso AB epoxy = JB Weld   Raymond C Drouillard
• Schematic help   Raymond C Drouillard
• EFI on Single Piston Engine?   Dupree, Robert A.
• Identifying Engine "Thingy's" - Minor EFI Content   Dupree, Robert A.
• Identifying Engine "Thingy's" - Minor EFI Content   Dupree, Robert A.
• Injector Sizing: REALLY dumb question   Shannen Durphey
• Injector Sizing: REALLY dumb question   Shannen Durphey
• it's dead, jim   Shannen Durphey
• ESC diagnostic   Shannen Durphey
• DIY_EFI Digest V3 #412   Shannen Durphey
• FAQ   Shannen Durphey
• GTA lives again   Shannen Durphey
• VATS Info   Shannen Durphey
• VATS Info   Shannen Durphey
• Code 42   Shannen Durphey
• Turbocharging a CMFI engine   Shannen Durphey
• bad harness   Shannen Durphey
• TPI on a 305   Shannen Durphey
• TPI on a 305   Shannen Durphey
• BIN needin one of those...   Shannen Durphey
• Training   Shannen Durphey
• VSS & 730 ECM   Shannen Durphey
• ID the flaring tool...   Shannen Durphey
• GM TBI - 4.3 vs 2.8 liter   Shannen Durphey
• GM TBI info needed   Shannen Durphey
• GM TBI info needed   Shannen Durphey
• Bin Needed, at CSH, HQ   Shannen Durphey
• Injector Clean   Shannen Durphey
• ID the flaring tool...   Shannen Durphey
• ID the flaring tool...   Shannen Durphey
• heat sinks and alt repair qiuestion   Shannen Durphey
• ECM ID   Shannen Durphey
• Edelbrock   Shannen Durphey
• PCM Number   Shannen Durphey
• HONDA ENGINE Q   Shannen Durphey
• fuel module   Shannen Durphey
• fuel module   Shannen Durphey
• Cal ID numbers [was Re: fuel module]   Shannen Durphey
• HC11 disassembler wanted   Shannen Durphey
• HC11 disassembler wanted   Shannen Durphey
• Handy URL   Shannen Durphey
• Courses   Shannen Durphey
• questions on gm 1226867 DJU TBI system   Shannen Durphey
• Felpro EFI review   Ed
• Schematic help   Orin Eman
• HC11 disassembler wanted   Orin Eman
• HC11 disassembler wanted   Orin Eman
• HC11 disassembler wanted   Orin Eman
• HC11 disassembler wanted (fwd)   Orin Eman
• HC11 disassembler wanted (fwd)   Orin Eman
• D-jet, 68HC11 disassembler   Orin Eman
• Returned mail: Service unavailable (fwd)   Orin Eman
• Doubler circuit   Orin Eman
• (Admin traffic, no efi content)   Orin Eman
• Calculating the Checksum   Georg Faustmann
• Tool for altering calibration in stock ECU   Georg Faustmann
• What size injector?   Roger Feingold
• What size injector?   Roger Feingold
• What size injector?   Roger Feingold
• VSS importance   Jeffery Flanary
• boost presser and power gain   Robert Gallant
• Reversing the '8625   Gene
• Auto Book   Heinrich Gerhardt
• Air Sensors FIRST TPI for SB Chevy   Joe Gervais
• VATS   Joe Gervais
• Rotary firings   Andrew Ghali
• Misc Questions   Steve Gorkowski
• RCA 1802 disassembler   Andre Grandi
• RCA 1802 disassembler   Andre Grandi
• RCA 1802 disassembler   Andre Grandi
• ID the flaring tool...   Charles Grosjean
• ignition miss   Andrew F. Gunnesch
• ignition miss   Andrew F. Gunnesch
• it's dead, jim   Andrew F. Gunnesch
• GTA lives again   Andrew F. Gunnesch
• bad harness   Andrew F. Gunnesch
• ignition fixed   Andrew F. Gunnesch
• [3] ignition fixed   Andrew F. Gunnesch
• miss still happening   Andrew F. Gunnesch
• L-Jetronic or LH-Jetronic for 77 mgb ? & ford tempo throtle b   Wallace A. Gustafson
• HC11 disassembler wanted   Wallace A. Gustafson
• DIY_EFI Digest V3 #433   Wallace A. Gustafson
• Website Error   John S. Gwynne
• Additional 68HC11 Registers?   Christian Hack
• Emulate   Christian Hack
• FW: Zoom Magazine   Christian Hack
• EGT the other way?.   Robert Harris
• Papers   Robert Harris
• Injectors   Roger Heflin
• 93 Z28 proms - some results - and questions   Roger Heflin
• Calculating the Checksum   Roger Heflin
• Calculating the Checksum   Roger Heflin
• Calculating the Checksum   Roger Heflin
• Additional 68HC11 Registers?   Roger Heflin
• Reading RAM locations   Roger Heflin
• Reading RAM locations   Roger Heflin
• Training   Roger Heflin
• Additional 68HC11 Registers?   Roger Heflin
• P4 memcal socket   Roger Heflin
• Identifying Engine "Thingy's" - Minor EFI Content   Roger Heflin
• assmeblers and disassemblers   Roger Heflin
• Identifying Engine "Thingy's" - Minor EFI Content   Roger Heflin
• MAP conversion   Roger Heflin
• HC11 disassembler wanted   Roger Heflin
• RCA 1802 disassembler   Daniel R. Henriksson
• Schematic help   T Hergen
• Blown Water pump   T Hergen
• Injector Clean   T Hergen
• Blown Water pump   T Hergen
• heat sinks and alt repair question   T Hergen
• HC11 disassembler wanted   T Hergen
• VSS importance   T Hergen
• VSS importance   T Hergen
• Doubler circuit   T Hergen
• More VSS   T Hergen
• boost presser and power gain   Greg Hermann
• boost presser and power gain   Greg Hermann
• boost presser and power gain   Greg Hermann
• Injector Sizing: REALLY dumb question   Greg Hermann
• boost presser and power gain   Greg Hermann
• air-assisted injectors, sort of   Greg Hermann
• Renault F1 V10   Greg Hermann
• air-assisted injectors, sort of   Greg Hermann
• Retrofit TBI to MGB   Greg Hermann
• air-assisted injectors, sort of   Greg Hermann
• Retrofit TBI to MGB   Greg Hermann
• Renault F1 V10   Greg Hermann
• Renault F1 V10   Greg Hermann
• RE Software for modifying GM TPI Fuel Map   Greg Hermann
• Injectors   Greg Hermann
• switching over carb to fi on ford 302.   Greg Hermann
• Felpro EFI review   Greg Hermann
• Injector Clean   Greg Hermann
• Volvo CFI system   Greg Hermann
• Volvo CFI system   Greg Hermann
• Volvo CFI system   Greg Hermann
• Rotary firings   Greg Hermann
• Injector Clean   Greg Hermann
• Injector Clean   Greg Hermann
• Injector Clean   Greg Hermann
• Rotary firings   Greg Hermann
• Rotary firings   Greg Hermann
• Rotary firings   Greg Hermann
• Papers   Greg Hermann
• Bosch Tech Book   Greg Hermann
• Tech info   Greg Hermann
• ID the flaring tool...   Greg Hermann
• Bosch Tech Book   Greg Hermann
• Tech info   Greg Hermann
• 327 GMC   Greg Hermann
• tech question   Greg Hermann
• assmeblers and disassemblers   Greg Hermann
• Inlet manifold runner length   Greg Hermann
• VSS importance   Greg Hermann
• turbo design   Greg Hermann
• Kalmaker   John Hess
• [cl] Knock Modules - LT1   John Hess
• Ideas needed   John Hess
• No Subject   George Hoefer
• VSS & 730 ECM   Mike Hoenes
• VSS importance   Mike Hoenes
• VSS- Part 1 solved   Mike Hoenes
• VSS importance   Robert W. Hughes
• new to list, FAQ, Bosch DME   Steve Iverson
• Volvo CFI system   Steve Jernigan
• Marelli ECU w/ 68332   Berlakovich Jo.
• SV: temperature sensors   Roland Johansson
• Dallas Semiconductor   Jon
• eec4 questions   Jon
• Reading RAM locations   Ian Jones
• Renault F1 V10   Michael Kasimirsky
• Renault F1 V10   Michael Kasimirsky
• New List Participant - very new   Michael Kasimirsky
• Non-GM knock sensor Q   Ken Kelly
• Felpro EFI review   Ken Kelly
• mc3484s2-1 driver chip   Robert J. Korn
• VATS Info   Kurek, Larry
• VSS & 730 ECM   Kurek, Larry
• Knock Modules - LT1   Kurek, Larry
• Identifying Engine "Thingy's" - Minor EFI Content   Kurek, Larry
• Identifying Engine "Thingy's" - Minor EFI Content   Kurek, Larry
• Identifying Engine "Thingy's" - Minor EFI Content   Kurek, Larry
• Non-GM knock sensor Q   Steve Lamb
• Nissan FJ20 Turbo Injection System   Steve Lamb
• 1100cc motorcycle injectors?   Steve Lamb
• Schematic help   Paul Lameiro
• Wide range lambda sensor   Ludis Langens
• Calling all gurus   Ludis Langens
• Additional 68HC11 Registers?   Ludis Langens
• P4 memcal socket   Ludis Langens
• HC11 disassembler wanted   Ludis Langens
• Cal ID numbers [was Re: fuel module]   Ludis Langens
• diy_disassembler   Ludis Langens
• MAP conversion   Ludis Langens
• VSS importance   Ludis Langens
• VSS - Permanent Magnet style   Ludis Langens
• Bosch   Georg Lerm
• Nubie Question   Georg Lerm
• L-Jetronic or LH-Jetronic for 77 mgb ? & ford tempo throtle body   Jim Lill
• Bosch   Jim Lill
• Auto Book   Jim Lill
• Smart Coils   Jim Lill
• which 3 wire O2 sensor ?   Jim Lill
• which 3 wire O2 sensor ?   Jim Lill
• L-Jetronic Air-flow sensor   Jake Lindeke
• L-Jetronic Air-flow sensor   Jake Lindeke
• L-Jetronic Air-flow sensor   Jake Lindeke
• Data logging efi   Jake Lindeke
• DIY_EFI address   Jake Lindeke
• Web site address???   Jake Lindeke
• EEPROM ppl in RTP, NC   Rick Lindstedt
• temperature sensors   Andrew W MacFadyen
• Renault F1 V10   Andrew W. Macfadyen
• Motronic 0261 200 XXX EPROM   Mike Macpherson
• Motronic 0261 200 XXX EPROM   Mike Macpherson
• Auto Book   Jeremiah Mahler
• Rotary firings   Alain Marchildon
• L-Jetronic Air-flow sensor   Benjamin Marsh
• L-Jetronic Air-flow sensor   Benjamin Marsh
• Auto Book   Benjamin Marsh
• Data logging efi   Benjamin Marsh
• VATS Info   Thomas Matthews
• VATS Info   Thomas Matthews
• Felpro EFI review   Thomas Matthews
• Felpro EFI review   Thomas Matthews
• TPI on a 305   Thomas Matthews
• FAQ   Quinton McCombs
• DIY_EFI Digest V3 #417   Quinton McCombs
• Lamba sendor readings - advise needed   Quinton McCombs
• Rotary firings   Quinton McCombs
• which 3 wire O2 sensor ?   Quinton McCombs
• VB020 ignition drivers   Tony Michael
• Additional 68HC11 Registers?   William E. Miller
• O2 sensors pre- and post-cat   Mike Morrin
• VSS importance   Mike Morrin
• D-jet, 68HC11 disassembler   Mike Morrin
• Fuel Curves   Chris Morriss
• Impedance of TBI's.   Ross Myers
• GM Cross Fire Injection For Sale   Ross Myers
• VATS Info   Ross Myers
• VATS Info   Ross Myers
• VATS Info   Ross Myers
• Thanks for the VATS info   Ross Myers
• VATS Info   Ross Myers
• Calculating the Checksum   Ross Myers
• Smart Coils   Ross Myers
• Hex - Assembler   Ross Myers
• Felpro EFI review   Ross Myers
• Felpro EFI review   Ross Myers
• Additional 68HC11 Registers?   Ross Myers
• HC11 disassembler wanted   Ross Myers
• HC11 disassembler wanted   Ross Myers
• What is this chip 68HC25?   Ross Myers
• What is this chip 68HC25?   Ross Myers
• Non-GM knock sensor Q   Frank F Parker
• Felpro EFI review   Frank F Parker
• PROM Programmers   Gregory A. Parmer
• FAQ   Gregory A. Parmer
• TPI on a 305   Gregory A. Parmer
• ID the flaring tool...   Gregory A. Parmer
• ID the flaring tool...   Gregory A. Parmer
• temperature sensors   David Piper
• Renault F1 V10   David Piper
• Injectors   David Piper
• Picoscope Software -- recommendation   David Piper
• Felpro EFI review   David Piper
• knock retard   David Piper
• [cl] Knock Modules - LT1   David Piper
• boost presser and power gain   Mike Pitts
• Injectors   Mike Pitts
• Reversing the '8625   Mike Pitts
• Reversing the '8625   Mike Pitts
• Reversing the '8625   Mike Pitts
• Tweaker musings   Mike Pitts
• Calling all gurus   Mike Pitts
• Website Error   Mike Pitts
• Turbocharging a CMFI engine   Mike Pitts
• Turbocharging a CMFI engine   Mike Pitts
• Reversing the '8625   Mike Pitts
• Additional 68HC11 Registers?   Mike Pitts
• Additional 68HC11 Registers?   Mike Pitts
• Reading RAM locations   Mike Pitts
• Felpro EFI review   Mike Pitts
• Additional 68HC11 Registers?   Mike Pitts
• Additional 68HC11 Registers?   Mike Pitts
• More '8625 stuff   Mike Pitts
• Diacom   Mike Pitts
• P4 memcal socket   Mike Pitts
• Diacom isn't always right.   Mike Pitts
• P4 memcal socket   Mike Pitts
• PCM Number   Mike Pitts
• Diacom/Serial Data   Mike Pitts
• assmeblers and disassemblers   Mike Pitts
• MAP conversion   Mike Pitts
• One Bar?   Mike Pitts
• MAP conversion   Mike Pitts
• MAP conversion   Mike Pitts
• DIY_EFI Digest V3 #445   Mike Pitts
• DIY_EFI Digest V3 #445   Mike Pitts
• Renault F1 V10   Bruce Plecan
• Injector Sizing: REALLY dumb question   Bruce Plecan
• Retrofit TBI to MGB   Bruce Plecan
• Renault F1 V10   Bruce Plecan
• Dallas Semiconductor   Bruce Plecan
• Impedance of TBI's.   Bruce Plecan
• Non-GM knock sensor Q   Bruce Plecan
• Non-GM knock sensor Q   Bruce Plecan
• Non-GM knock sensor Q//Plug Readings   Bruce Plecan
• Software for modifying GM TPI Fuel Map   Bruce Plecan
• Non-GM knock sensor Q   Bruce Plecan
• Fuel Curves   Bruce Plecan
• How good are you at recognizing abnormal O2 sensor beavior   Bruce Plecan
• ignition miss   Bruce Plecan
• Injectors   Bruce Plecan
• ESC diagnostic   Bruce Plecan
• ARC-2   Bruce Plecan
• GM Cross Fire Injection For Sale   Bruce Plecan
• ARC-2   Bruce Plecan
• DIY_EFI Digest V3 #412 + CSH Diagnostic aid   Bruce Plecan
• switching over carb to fi on ford 302.   Bruce Plecan
• Misc Questions   Bruce Plecan
• L-Jetronic Air-flow sensor   Bruce Plecan
• VATS Info   Bruce Plecan
• FAQ   Bruce Plecan
• Website Error   Bruce Plecan
• IAC PULLS BACKWARDS???   Bruce Plecan
• Smart Coils   Bruce Plecan
• Error+Corrections, New Stuff   Bruce Plecan
• O2 sensors pre- and post-cat   Bruce Plecan
• Calculating the Checksum   Bruce Plecan
• O2 sensors pre- and post-cat   Bruce Plecan
• Felpro EFI review   Bruce Plecan
• Delco Catalog   Bruce Plecan
• Felpro EFI review   Bruce Plecan
• Felpro EFI review   Bruce Plecan
• Emulate   Bruce Plecan
• Skip Shift   Bruce Plecan
• EGT the other way?.   Bruce Plecan
• MAF vs MAP   Bruce Plecan
• PCM help   Bruce Plecan
• TPI on a 305   Bruce Plecan
• TPI on a 305   Bruce Plecan
• MAF vs MAP   Bruce Plecan
• Training   Bruce Plecan
• Felpro EFI review   Bruce Plecan
• TBI Flow Rates   Bruce Plecan
• Lamba sendor readings - advise needed   Bruce Plecan
• Rotary firings   Bruce Plecan
• Injector Clean   Bruce Plecan
• Injector Clean   Bruce Plecan
• Injector Clean   Bruce Plecan
• Injector Clean   Bruce Plecan
• VSS question too   Bruce Plecan
• Volvo CFI system   Bruce Plecan
• Injector Clean   Bruce Plecan
• Bin Needed, at CSH, HQ   Bruce Plecan
• GM TBI - 4.3 vs 2.8 liter   Bruce Plecan
• Bin Needed, at CSH, HQ   Bruce Plecan
• PID Algorithm, and CSH, HQ has flash ideas about proms   Bruce Plecan
• Papers   Bruce Plecan
• Papers   Bruce Plecan
• HC11 disassembler wanted   Bruce Plecan
• which 3 wire O2 sensor ?   Bruce Plecan
• To Mike Pitts   Bruce Plecan
• Bench ECMs   Bruce Plecan
• which 3 wire O2 sensor ?   Bruce Plecan
• which 3 wire O2 sensor ?   Bruce Plecan
• PCM Number   Bruce Plecan
• Diacom/Serial Data   Bruce Plecan
• knock retard   Bruce Plecan
• assmeblers and disassemblers   Bruce Plecan
• What size injector?   Bruce Plecan
• assmeblers and disassemblers   Bruce Plecan
• programming is greek to me   Bruce Plecan
• fuel module   Bruce Plecan
• What size injector?   Bruce Plecan
• One Bar?   Bruce Plecan
• HC11 disassembler wanted   Bruce Plecan
• Dumb guy with a Smart Coil   Bruce Plecan
• HC11 disassembler wanted   Bruce Plecan
• Ida Demo   Bruce Plecan
• HC11 disassembler wanted (fwd)   Bruce Plecan
• Benching ecms   Bruce Plecan
• Inlet manifold runner length   Bruce Plecan
• Courses   Bruce Plecan
• Inlet manifold runner length   Bruce Plecan
• VSS+P/N Switch   Bruce Plecan
• VSS importance   Bruce Plecan
• VSS importance   Bruce Plecan
• VSS importance   Bruce Plecan
• VSS importance   Bruce Plecan
• VSS importance   Bruce Plecan
• VSS importance   Bruce Plecan
• DIY_EFI Digest V3 #445   Bruce Plecan
• VSS importance   Bruce Plecan
• [cl] Knock Modules - LT1   Bruce Plecan
• DIY_EFI Digest V3 #445   Bruce Plecan
• VSS importance   Bruce Plecan
• VSS- Part 1 solved   Bruce Plecan
• More VSS   Bruce Plecan
• Ideas needed   Bruce Plecan
• For Steve Ravet   Bruce Plecan
• VSS and running off of ecm   Bruce Plecan
• More VSS   Bruce Plecan
• Today's Trivia   Bruce Plecan
• VATS   Bruce Plecan
• Felpro EFI review   Geoff Potter
• Felpro EFI review   Geoff Potter
• Synthetic Oil   Martin Powlette
• Code 42   Martin Powlette
• Code 42   Martin Powlette
• Auto Book   Martin Powlette
• Auto Book   Martin Powlette
• Blown Water pump   Martin Powlette
• Blown Water pump   Martin Powlette
• Blown Water pump   Martin Powlette
• Blown Water pump   Martin Powlette
• Garage stuff   Martin Powlette
• Garage stuff   Martin Powlette
• Courses   Martin Powlette
• Port Style Injection vs "Direct" Injection   Jeremy Pronk
• rotary firings   Craig Pugsley
• Opel/Vauxhall Astra   Carlo Putter
• Test, and I'm back.   Steve Ravet
• Test, and I'm back.   Steve Ravet
• O2 sensors pre- and post-cat   Steve Ravet
• Bosch red and blue handbooks.   Steve Ravet
• VSS & 730 ECM   Steve Ravet
• GM TBI info needed   Steve Ravet
• [cl] Knock Modules - LT1   Steve Ravet
• assmeblers and disassemblers   Steve Ravet
• assmeblers and disassemblers   Steve Ravet
• assmeblers and disassemblers   Steve Ravet
• VSS importance   Steve Ravet
• new to list, FAQ, Bosch DME   Steve Ravet
• GM Cross Fire Injection For Sale   Gwyn Reedy
• Rotary firings   Chris Rhodin
• New List Participant - very new   Jemison Richard
• New List Participant - very new   Jemison Richard
• New List Participant - very new   Jemison Richard
• New List Participant - very new   Jemison Richard
• Where is everyone?   Geoff & Sue Richards
• Reversing the '8625   Geoff & Sue Richards
• Bosch red and blue handbooks.   Geoff & Sue Richards
• Training   Geoff & Sue Richards
• Injector Clean   Geoff & Sue Richards
• Lindertech   Geoff & Sue Richards
• Tech 2   Geoff & Sue Richards
• Papers   Geoff & Sue Richards
• Papers   Geoff & Sue Richards
• Fuel Curves   Bruce Robertson
• O2 sensors pre- and post-cat   Mark Romans
• Calpac   Vance Rose
• VATS Info   Vance Rose
• VSS & 730 ECM   Vance Rose
• Dallas Semiconductor   Alex Samson
• RE Software for modifying GM TPI Fuel Map   Alex Samson
• Re Abnormal O2 reading   Alex Samson
• Re Injectors   Alex Samson
• PROM Programmers   Sandy
• PROM Programmers   Sandy
• PROM Programmers   Sandy
• Misc Questions   Sandy
• Ignition/Injection Driver   Sandy
• PROM Programmers   Scott Schaaf
• Calculating the Checksum   Scott Schaaf
• Injector Clean   Scott Schaaf
• (NON_EFI!!!) Yankee Infestation Problem   Scott Schaaf
• Synthetic Oil   ShannenDurphey
• Reversing the '8625   ShannenDurphey
• Reversing the '8625   ShannenDurphey
• Reversing the '8625   ShannenDurphey
• Identifying broadcast codes.   ShannenDurphey
• pre-fuel filter advice needed   Tom Sharpe
• Injector Sizing: REALLY dumb question -Reply   Tom Sharpe
• More 101 stuff   Tom Sharpe
• GM Cross Fire Injection For Sale   Tom Sharpe
• wide range oxygen sensors.   Tom Sharpe
• boost presser and power gain   Tom Sharpe
• air-assisted injectors, sort of   Tom Sharpe
• Turbocharging a natural gas engine   Tom Sharpe
• Retrofit TBI to MGB   Tom Sharpe
• Renault F1 V10   Tom Sharpe
• Dallas Semiconductor   Tom Sharpe
• Non-GM knock sensor Q   Tom Sharpe
• RE Software for modifying GM TPI Fuel Map   Tom Sharpe
• Injectors   Tom Sharpe
• bad harness   Tom Sharpe
• MAF vs MAP   Tom Sharpe
• Additional 68HC11 Registers?   Tom Sharpe
• Nubie Question   Tom Sharpe
• Injector Clean   Tom Sharpe
• Nubie Question   Tom Sharpe
• ID the flaring tool...   Tom Sharpe
• 327 GMC   Tom Sharpe
• [cl] Knock Modules - LT1   Tom Sharpe
• ECMs   Tom Sharpe
• ECMs   Tom Sharpe
• MAP conversion   Tom Sharpe
• VSS importance   Tom Sharpe
• Retrofit TBI to MGB   Clare Snyder
• it's dead, jim   Clare Snyder
• Injector Clean   Clare Snyder
• Blown Water pump   Clare Snyder
• Rotary firings   Clare Snyder
• Injector Clean   Clare Snyder
• Volvo CFI system   Clare Snyder
• Injector Clean   Clare Snyder
• Rotary firings   Clare Snyder
• Rotary firings   Clare Snyder
• Rotary firings   Clare Snyder
• ID the flaring tool...   Clare Snyder
• 1100cc motorcycle injectors?   Clare Snyder
• Inlet manifold runner length   Clare Snyder
• Turbocharging a natural gas engine   Jake Sternberg
• temperature sensors   Jake Sternberg
• DIY_EFI Digest V3 #412   Jake Sternberg
• Moroso AB epoxy = JB Weld   Jake Sternberg
• Data logging efi   Jake Sternberg
• NEED ROM for 1991 5.7L TBI w/AT and MAP   Jake Sternberg
• TPI on a 305   Jake Sternberg
• old C3 ECMs wanted   Jake Sternberg
• VSS question too   Jake Sternberg
• rotary FACTS - now can we stop!?   Jake Sternberg
• tech question   Jake Sternberg
• 1100cc motorcycle injectors?   Jake Sternberg
• VSS importance   Jake Sternberg
• Addition injector(s) controller   Steve
• switching over carb to fi on ford 302.   Dave Stinar
• Rotary firings   Dave Stinar
• Rotary firings   Dave Stinar
• Retrofit TBI to MGB   Stowe, Ted-SEA
• L-Jetronic or LH-Jetronic for 77 mgb ? & ford tempo throtle body   Stowe, Ted-SEA
• L-Jetronic or LH-Jetronic for 77 mgb ? & ford tempo throtle b   Stowe, Ted-SEA
• speed sensor from a GM TBI system 85 sunbird ?   Stowe, Ted-SEA
• Motronic?   Stowe, Ted-SEA
• VSS & 730 ECM   Stowe, Ted-SEA
• GM TBI info needed   Stowe, Ted-SEA
• GM TBI info needed   Stowe, Ted-SEA
• which 3 wire O2 sensor ?   Stowe, Ted-SEA
• which 3 wire O2 sensor ?   Stowe, Ted-SEA
• which 3 wire O2 sensor ?   Stowe, Ted-SEA
• questions on gm 1226867 DJU TBI system   Stowe, Ted-SEA
• VSS importance   Stowe, Ted-SEA
• VATS Info   TBK
• VATS Info   TBK
• Calculating the Checksum   TBK
• TPI on a 305   TBK
• 2x8bit to 16bit file?   TBK
• TPI on a 305   TBK
• Nissan FJ20 Turbo Injection System   Nick Tangney
• Nissan FJ20 Turbo Injection System   Nick Tangney
• Renault F1 V10   Adrian Teo
• Synthetic Oil   Adrian Teo
• ARC-2   Terry
• O2 sensors pre- and post-cat   Terry
• Felpro EFI review   Terry
• Felpro EFI review   Terry
• 327 GMC   Terry
• [cl] Knock Modules - LT1   Terry
• Diacom(was knock retard)   Terry
• big-block TPI   Terry
• big-block TPI   Terry
• Blown Water pump   Paul Tholey
• What is this chip 68HC25?   Kevin Timmerman
• 1802 Hacker Question   Kevin Timmerman
• Synthetic Oil   Alain Toussaint
• Alain Toussant   Alain Toussaint
• What size injector?   Alain Toussaint
• Ida Demo   Alain Toussaint
• (NON_EFI!!!) Yankee Infestation Problem   Mike Turner
• More VSS   Mike Turner
• ARC-2   Kevin Vannorsdel
• [cl] Knock Modules - LT1   H Villemure
• DIY_EFI Digest V3 #433   H Villemure
• What size injector?   H Villemure
• HC11 disassembler wanted   Wouter de Waal
• D-jet, 68HC11 disassembler   Wouter de Waal
• diy_disassembler   Wouter de Waal
• BBNT.bin Wanted   Richard Wakeling
• ID the flaring tool...   Darryn Watson
• Injectors   James Weiler
• it's dead, jim   James Weiler
• Non-GM knock sensor Q   Jason Weir
• Non-GM knock sensor Q   Jason Weir
• Injectors   Jason Weir
• eec-iv high idle problem   Jason Weir
• Edelbrock   Jason Weir
• temperature sensors   West, David
• Injector Clean   West, David
• turbo design   West, David
• turbo design   West, David
• Additional 68HC11 Registers?   Donald Whisnant
• project   Dave Williams
• assmeblers and disassemblers   Dave Williams
• Caddy 472-500   Dave Williams
• Turbocharging a CMFI engine   Jerry Wills
• [cl] Knock Modules - LT1   Wronski
• L-Jetronic Air-flow sensor   Zack
• L-Jetronic Air-flow sensor   Zack
• L-Jetronic Air-flow sensor   Zack
• Rotary firings   Zack
• Rotary firings   Zack
• ESC diagnostic   am018
• Synthetic Oil   am018
• Picoscope Software -- recommendation   am018
• Data logging efi   am018
• Data logging efi   am018
• Picoscope Software -- recommendation   am018
• Data logging efi   am018
• One Bar?   am018
• miss still happening   am018
• Renault F1 V10   ants
• Renault F1 V10   ants
• Force Fuel Injection   A70Duster at aol.com
• Injectors   AJLegere at aol.com
• L-Jetronic Air-flow sensor   AL8001 at aol.com
• fuel module   AL8001 at aol.com
• Injector Clean   BossOz at aol.com
• Injector Clean   BossOz at aol.com
• project   BossOz at aol.com
• heat sinks and alt repair qiuestion   BossOz at aol.com
• assmeblers and disassemblers   BossOz at aol.com
• programming is greek to me   BossOz at aol.com
• programming is greek to me   BossOz at aol.com
• EFI vs. Webers   ChrisBourk at aol.com
• Turbocharging a CMFI engine   ChrisBourk at aol.com
• Calculating the Checksum and more...   ChrisBourk at aol.com
• MAF vs MAP   ChrisBourk at aol.com
• Felpro EFI review   ChrisBourk at aol.com
• Motronic?   ChrisBourk at aol.com
• Injector Clean   ChrisBourk at aol.com
• Rotary firings   ChrisBourk at aol.com
• Injector Clean   ChrisBourk at aol.com
• Injector Clean   ChrisBourk at aol.com
• Rotary firings   ChrisBourk at aol.com
• Rotary firings   ChrisBourk at aol.com
• RCA 1802 disassembler   ChrisBourk at aol.com
• RCA 1802 disassembler   ChrisBourk at aol.com
• Inlet manifold runner length   ChrisBourk at aol.com
• Inlet manifold runner length   ChrisBourk at aol.com
• Tech info   ChrisGano at aol.com
• Tech info   ChrisGano at aol.com
• Non-GM knock sensor Q   ECMnut at aol.com
• Website Error   ECMnut at aol.com
• Making Port Style Injection bye bye Webers   ECMnut at aol.com
• Felpro EFI review   ECMnut at aol.com
• HC11 disassembler wanted   ECMnut at aol.com
• Caddy 472-500   ECMnut at aol.com
• Inlet manifold runner length   ECMnut at aol.com
• Renault F1 V10   EFISYSTEMS at aol.com
• NEED ROM for 1991 5.7L TBI w/AT and MAP   EFISYSTEMS at aol.com
• bad harness   EFISYSTEMS at aol.com
• PID Algorithm, and CSH, HQ has flash ideas about proms   EFISYSTEMS at aol.com
• ECM ID   EFISYSTEMS at aol.com
• ECM ID   EFISYSTEMS at aol.com
• which 3 wire O2 sensor ?   EFISYSTEMS at aol.com
• 327 GMC   EFISYSTEMS at aol.com
• IAC PULLS BACKWARDS???   Fisystems at aol.com
• TBI Flow Rates   Fisystems at aol.com
• HC11 disassembler wanted   Fisystems at aol.com
• knock retard   Fisystems at aol.com
• Syclone prom   Fisystems at aol.com
• How good are you at recognizing abnormal O2 sensor beavior   GRUMPYNOMO at aol.com
• O2 sensors pre- and post-cat   JRECPA at aol.com
• heat sinks and alt repair qiuestion   JRECPA at aol.com
• heat sinks and alt repair qiuestion   KD6JDJ at aol.com
• heat sinks and alt repair qiuestion   KD6JDJ at aol.com
• assmeblers and disassemblers   MrCad472 at aol.com
• assmeblers and disassemblers   MrCad472 at aol.com
• Caddy 472-500   MrCad472 at aol.com
• assmeblers and disassemblers   MrCad472 at aol.com
• Caddy 472-500   MrCad472 at aol.com
• Caddy 472-500   MrCad472 at aol.com
• Software for modifying GM TPI Fuel Map   PFMaxin at aol.com
• Injector Clean   WATCHmeDRV at aol.com
• air-assisted injectors, sort of   jb24 at chrysler.com
• Auto Book   jb24 at chrysler.com
• VSS importance   jdzura at csc.com
• Doubler circuit   jdzura at csc.com
• Failed message   jdzura at csc.com
• More VSS   jdzura at csc.com
• More VSS   jdzura at csc.com
• heat sinks and alt repair question   Terry_Sare at dell.com
• assemblers and dissemblers   Terry_Sare at dell.com
• DIY_EFI Digest V3 #409   talltom at espace.dcl.com
• DIY_EFI Digest V3 #411   talltom at espace.dcl.com
• DIY_EFI Digest V3 #439   talltom at espace.dcl.com
• Reversing the '8625   peter paul fenske
• IAC PULLS BACKWARDS???   peter paul fenske
• Turbocharging a CMFI engine   peter paul fenske
• Skip Shift   peter paul fenske
• VSS & 730 ECM   peter paul fenske
• Injector Clean   peter paul fenske
• HONDA ENGINE Q   peter paul fenske
• Diacom/Serial Data   peter paul fenske
• What size injector?   peter paul fenske
• What size injector?   peter paul fenske
• What size   peter paul fenske
• What size injector?   peter paul fenske
• VSS importance   peter paul fenske
• Ideas needed   peter paul fenske
• GM TBI - 4.3 vs 2.8 liter   ibeme at glasscity.net
• Injector Sizing: REALLY dumb question   xxalexx at ix.netcom.com
• air-assisted injectors, sort of   xxalexx at ix.netcom.com
• Injector Sizing: REALLY dumb question   xxalexx at ix.netcom.com
• temperature sensors   xxalexx at ix.netcom.com
• Dallas Semiconductor   xxalexx at ix.netcom.com
• Invaluable resource--inexpensive good quality pcbs for proto   xxalexx at ix.netcom.com
• pcbs for proto   xxalexx at ix.netcom.com
• ARC-2   xxalexx at ix.netcom.com
• Fuel Curves   xxalexx at ix.netcom.com
• H2 meter   xxalexx at ix.netcom.com
• L-Jetronic Air-flow sensor   xxalexx at ix.netcom.com
• L-Jetronic Air-flow sensor   xxalexx at ix.netcom.com
• DIY_EFI Digest V3 #417   xxalexx at ix.netcom.com
• O2 sensors pre- and post-cat   xxalexx at ix.netcom.com
• Data logging efi   xxalexx at ix.netcom.com
• ALDL description page   xxalexx at ix.netcom.com
• O2 sensors pre- and post-cat   xxalexx at ix.netcom.com
• Emulate   xxalexx at ix.netcom.com
• Lamba sendor readings - advise needed   xxalexx at ix.netcom.com
• 1995 LeSabre PCM help...   xxalexx at ix.netcom.com
• Volvo CFI system   xxalexx at ix.netcom.com
• which 3 wire O2 sensor ?   xxalexx at ix.netcom.com
• Bosch Tech Book   xxalexx at ix.netcom.com
• [cl] Knock Modules - LT1   xxalexx at ix.netcom.com
• Identifying Engine "Thingy's" - Minor EFI Content   xxalexx at ix.netcom.com
• More VSS   xxalexx at ix.netcom.com
• VSS and running off of ecm   xxalexx at ix.netcom.com
• More VSS   xxalexx at ix.netcom.com
• knock retard   wayne johnson
• knock retard   wayne johnson
• knock retard   wayne johnson
• Felpro EFI review   greg kring
• source for 3 BAR MAP?   greg kring
• Felpro EFI review   greg kring
• Felpro EFI review   greg kring
• Felpro EFI review   greg kring
• Force Fuel Injection   greg kring
• dead cylinder affect O2?   greg kring
• heat sinks and alt repair qiuestion   rbraun at mail.enter.net
• heat sinks and alt repair qiuestion   rbraun at mail.enter.net
• heat sinks and alt repair question, here's what I did   rbraun at mail.enter.net
• heat sinks and alt repair qiuestion   rbraun at mail.enter.net
• Synthetic Oil   mrvette
• Motronic?   mrvette
• which 3 wire O2 sensor ?   mrvette
• assmeblers and disassemblers   mrvette
• Caddy 472-500   mrvette
• Caddy 472-500   mrvette
• Caddy 472-500   mrvette
• Caddy 472-500   mrvette
• Caddy 472-500   mrvette
• Caddy 472-500   mrvette
• DIY_EFI Digest V3 #438   mrvette
• questions on gm 1226867 DJU TBI system   mrvette
• VSS importance   mrvette
• More VSS   mrvette
• New List Participant - very new   mrvette
• New List Participant - very new   mrvette
• New List Participant - very new   mrvette
• Injector Sizing: not dumb questions at all   goflo at pacbell.net
• boost presser and power gain   goflo at pacbell.net
• Retrofit TBI to MGB   goflo at pacbell.net
• boost presser and power gain   goflo at pacbell.net
• boost presser and power gain   goflo at pacbell.net
• Retrofit TBI to MGB   goflo at pacbell.net
• Retrofit TBI to MGB   goflo at pacbell.net
• Retrofit TBI to MGB   goflo at pacbell.net
• Renault F1 V10   goflo at pacbell.net
• Dallas Semiconductor   goflo at pacbell.net
• temperature sensors   goflo at pacbell.net
• Retrofit TBI to MGB   goflo at pacbell.net
• Turbocharging a natural gas engine   goflo at pacbell.net
• Fuel Curves   goflo at pacbell.net
• L-Jetronic Air-flow sensor   goflo at pacbell.net
• L-Jetronic or LH-Jetronic for 77 mgb ? & ford tempo throtle b   goflo at pacbell.net
• FAQ   goflo at pacbell.net
• Auto Book   goflo at pacbell.net
• reference   goflo at pacbell.net
• EGT the other way?.   goflo at pacbell.net
• Volvo CFI system   goflo at pacbell.net
• Volvo CFI system   goflo at pacbell.net
• Bin Needed, at CSH, HQ   goflo at pacbell.net
• programming is greek to me   goflo at pacbell.net
• programming is greek to me   goflo at pacbell.net
• assmeblers and disassemblers   goflo at pacbell.net
• assmeblers and disassemblers   goflo at pacbell.net
• assmeblers and disassemblers   goflo at pacbell.net
• VSS and running off of ecm   goflo at pacbell.net
• wanted: prom carrier & ESC   andy quaas
• big-block TPI   andy quaas
• Motronic 0261 200 XXX EPROM   fpalumbo at rtmol.it
• Information Exchange   fpalumbo at rtmol.it
• Bosch   fpalumbo at rtmol.it
• Welders and alt repair qiuestion   eric schumacher
• PROM Programmers   Don.F.Broadus at ucm.com
• Calculating the Checksum   Don.F.Broadus at ucm.com
• Calculating the Checksum   Don.F.Broadus at ucm.com
• ECM ID   Don.F.Broadus at ucm.com
• ECM ID   Don.F.Broadus at ucm.com
• OBD 2   Don.F.Broadus at ucm.com
• fuel module   Don.F.Broadus at ucm.com
• fuel module   Don.F.Broadus at ucm.com
• turbo design   d houlton x0710

Last message date: Wed Sep 30 23:59:00 GMT 1998
Archived on: Thu May 30 05:54:09 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...