327 GMC

[Gary Derian]

Its an iron block version of the LS1 Vette/Camaro engine.  The LS1 is 5.7
liter, the truck motors come 4.8, 5.3 and 6.0.  The 6.0 has iron heads.
Gary Derian <gderian at cybergate.net>

-----Original Message-----
From: Tom Sharpe <twsharpe at mtco.com>
To: efi332 at efi332.eng.ohio-state.edu <efi332 at efi332.eng.ohio-state.edu>;
diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Monday, September 21, 1998 6:55 PM
Subject: 327 GMC


>Just saw a new 99 GMC 327 with 8 coils, four on each valve cover with a
>little wire to each plug. It also had no regulator and return line, the
>pump varies the pressure. I'll bet it is completely sequential. If someone
>could get one to look at, it might help out with the 332 project. If
>someone could get a copy of the software.....
>
>The intake looked like a tall LT5 with long U shaped plastic tubes. The
>most interesting thing was the FORD heads on it..... REALLY, they had
>evenly distributed intake ports and exhaust ports like a FORD. It must be
>a completely new as they are not like the SB2 or LT5. Whatever.....
>
>Regards  Tom
>