What size injector?

[Roger Feingold]

Peter, it's SOHC with lots of porting and good cam with high lift rockers.
The lift is about .475 -.500" so I'm hoping there will be a good power band
in the higher revs. Do you know the flow rate for the 305 and 350 TPI setups?
Think it's around 21 lb/hr. This would be a good source of injectors.

BTW, from my flow testing here, stock multec injectors have a faster response
than the older oem pintle types. PW under 1.2 ms will not fully open the
injector.
High PW D/Cs with a turn-off under 1 ms will not close the injector. Pintles
seem
to have a better dispersion than the 5 micro hole multecs.

Roger.