DIY_EFI Digest V3 #445

[Bruce Plecan]

-----Original Message-----
From: Mike Pitts <mpitts at netspeak.com>
To: 'diy_efi at efi332.eng.ohio-state.edu' <diy_efi at efi332.eng.ohio-state.edu>
Date: Tuesday, September 29, 1998 12:38 PM
Subject: RE: DIY_EFI Digest V3 #445

Was talking about a 730 ecm.  I consider the 2000 as close enough, is all
I think it can be worked out into decimal points.

I'm talking about two issues here, the 2000+4000 ppm, and how to inferface
them, for ecm transplants.

This is on your 8625?..  The 2000ppm.


>>>Feeding a 2000 pulse into the computer would give the
>>>computer a half speed input.
>
>Interesting.  My service manual states that my VSS sends
>2002 pulses per mile.  This is a '93 CPI engine with the
>electronic trans.
>
>-Mike
>