DIS, and 68HC12

[Niinikoski Juha]

Big snip

I have used Axiom manufacturing boards in my projects.
http://www.geocities.com/MotorCity/Factory/6113/
http://www.axman.com/

Juha
> -----Original Message-----
> From:	Jurgen Hartwig [SMTP:gt0003a at prism.gatech.edu]
> Sent:	27. huhtikuuta 1999 21:36
> To:	diy_efi at efi332.eng.ohio-state.edu
> Subject:	DIS, and 68HC12
> Basically, my friend and I are designing a system around the Motorola
> 68HC12 series microcontroller.  It is similar to the system that Tim
> Drury has outlined on his website.  Now, I'd like to interface with some
> of you that have had experience with the 68HC12 or 68HC11.  We need to
> find some development boards or similar, and I have found two at around
> $100.  Is it easy to build my own board?  The HC12 has 110+ pins, so it
> sounds like it would be tough.
> Jay
> -- 
>