injector size and bin questions

Greg Hermann bearbvd at sni.net
Wed Feb 24 05:47:54 GMT 1999


>Injectors may be rated several ways, generally static flow and dynamic.
>Static is full on, dynamic is cycled at various duty cycles. Fuel pressure
>is up to the maker, but often is 3 bar, (3x barometric) or 3 x 14.7 PSI.
>
>Ward
\
Close, but Monica is out to lunch! 1 bar =100,000 kPa=14._5_ psi, not 1
atm. or 14.7 psi
>
>-----Original Message-----
>From: owner-diy_efi at efi332.eng.ohio-state.edu
>[mailto:owner-diy_efi at efi332.eng.ohio-state.edu]On Behalf Of Doug
>Mansfield
>Sent: Tuesday, February 23, 1999 9:58 AM
>To: Do-it-Yourself Fuel Injection Mailing List
>Subject: injector size and bin questions
>
>
>
>First fuel injector size:
>
>What conditions are fuel injectors rated under.  If it is rated for
>35lbs/hr, what fuel pressure and air pressure are these rated at?
>
>
>Binaries:
>
>Do the rom dumps from the GM ECMs contain both the "program" and the "data"?
>
>
>Thanks
>
>Doug





More information about the Diy_efi mailing list