92 Corvette LT-1

[Roger Heflin]

On Sat, 2 Jan 1999 EFISYSTEMS at aol.com wrote:

> In a message dated 1/2/99 2:47:23 PM Pacific Standard Time, ChvyRs92 at aol.com
> writes:
> 
> Hello,
>      In my opinion I think it would be best to get the GM service manuals for
> both vehicles so you have an accurate schematic for both wiring
> harness'....then start cutting.......If you have a prom reader/burner  I'm
> sure one of us on this list could give you the address info to eliminate your
> VATS....otherwise you might want to spend a couple of bucks and send it to one
> of us willing to do some custom work on the chip for you.....Hypertech,JET and
> others can do this also..........hth's
> -Carl Summers
> 

I am working on reverse engineering the addresses for a 93 Z28 LT1 A4
which I believe uses the same computer and probably almost the same
prom for both 92/93.  If you have a prom burner you might send me a
copy and I will see how different it is.  

Mine is an A4 so if yours came from a non-A4 there might be some
differences there.

			Roger